WHAT IS BIODIESEL?
Biodiesel is the least carbon intensive, most thoroughly tested alternative fuel available today. It will run in any diesel engine, in any ratio without any retrofitting of that engine. It is the only commercially sold “advanced biofuel” in the US that has been approved by the EPA, CARB, and the DOT. [Alternative Fuels Data Center]
WHAT IS BIODIESEL MADE FROM?
Any vegetable or animal oil, including used cooking oil.
WILL BIODIESEL HARM MY ENGINE?
No, biodiesel is actually better for your engine. It is a solvent and a lubricant, as well as a fuel, so it will clean out a system that has been running petroleum diesel, and it will provide lubrication for your injection pump and other parts. The ultra low sulfur diesel that is available now has less lubrication (that’s what the sulfur was for) so it is hard on engines that weren’t designed for it. Even running just a small percentage of biodiesel mixed with regular diesel will allow your engine to run with better "lubricity".
CAN I MAKE BIODIESEL FROM USED MOTOR OIL?
No, mineral oils will not convert to biodiesel. Only vegetable or animal oils will work.
WHAT IS A BIOPRO?
A BioPro is an automated appliance, made by Springboard Biodiesel, that converts any vegetable or animal oil, including used cooking oil, into ASTM-grade (premium) biodiesel fuel.
IS A BIOPRO HARD TO OPERATE?
It’s automated and extremely easy to use. Like a washing machine, you load it, turn it on, and walk away.
WHAT IS THE CAPACITY?
The BioPro comes in two sizes: 50 and 100 gallons.
HOW LONG DOES IT TAKE TO MAKE A BATCH?
48 hours in the standard models, 23 hours in the EX models, and 11.5 to 13 hrs when combined with a SpringPro T76 dry wash system.
(Note: with the use of "Buffer Tanks" and a SpringPro T76, one system can produce 270 gallons or 1010 liters per day.)
HOW MUCH DOES IT COST TO MAKE BIODIESEL IN A BIOPRO?
If you or your business has access to used cooking oil for free (you already paid for it), the cost to make fuel in a BioPro is roughly $1.15/gallon. This figure is the cost of the other inputs, including electricity and catalysts that are required to make biodiesel in a BioPro.
WHAT IS THE CONVERSION RATIO?
Every 1000 gallons of used cooking oil will yield approximately 990 gallons of biodiesel.
WHAT IS THE EXPECTED LIFE SPAN OF THE BIOPRO?
20+ years.
WHAT DISTINGUISHES THESE PROCESSORS FROM OTHERS AVAILABLE ON THE MARKET?
- They are easy to use (automated!).
- They are safe.
- They make ASTM-D6751 grade biodiesel consistently and reliably (if a user follows the directions in the manual).
- Because the BioPro shepherds a dual reaction (acid then base), it will convert a wider range of oils than most other small-scale processors that only do a base reaction.
- Track record – machines currently operating in 18 countries, in all 50 states and at 72 US educational systems.
WHO ELSE IS INVOLVED IN BIODIESEL PRODUCTION?
It is currently mandated in 64 countries that biodiesel is blended into all diesel sold. 86.42 Billion Liters (22.86 Billion gallons) were produced in 2023 by leading producers. More than 1500 BioPro systems are currently in operation in all 50 states and in 40 countries (as of June 2024).
HOW LONG WILL IT TAKE TO PAY BACK MY BIOPRO?
- See Return on investment calculator
- If a restaurant (assuming it had this volume of cooking oil) started using our BioPro 380EX (which makes 100 gallons of biodiesel from 100 gallons of cooking oil every 23 hours) and made 2400 gallons per month (employee took Sundays off but was hired to load the machine and unload it once a day on the other days of the week), that restaurant will pay for its machine and labor in 4.5 months. That’s with diesel at $3/gal. If they kept that production rate up, they would save more than $50K by the end of the first year, in fuel value, and $65,000 in every subsequent year.
- Example of BioPro 380EX + T76 production scenario and returns.
DOES THE MACHINE COME WITH A WARRANTY?
Yes, 1 year.
WHAT KIND OF POWER DOES THE BIOPRO RUN ON?
110V for the BioPro 190, 190EX, and SpringPro T76. 220V is required for the 380 and 380EX. The maximum draw is 15 amps, single phase. We can convert to any country's power requirements and currently have machines in 30 countries
WHAT IS THE ENERGY CONSUMPTION PER BATCH?
22-30 Kw hours per batch. In California this amounts to approximately $8.00 of electricity per batch.
WHAT ARE THE OTHER INPUTS YOU NEED TO ADD TO THE MACHINE TO CONVERT THE OIL INTO BIODIESEL?
Methanol (99.9% pure), sodium hydroxide (98% pure) or potassium hydroxide (90% pure at minimum), sulfuric acid (minimum 93% pure), water, and electricity.
HOW MUCH SPACE WILL I NEED TO OPERATE A BIOPRO?
The footprint of the equipment is small: 22” x 22” for the 190 and 190EX. The 380’s footprint is 42” x 33”. We recommend a space that is at minimum 10’ x 8’ with an 8' high ceiling at minim. When operating a BioPro 380, we recommend a ceiling height of 8.5’ or higher.
WHAT OTHER ACCESSORIES WILL I NEED?
A methanol pump, storage for your used cooking oil and/or your finished biodiesel (IBC totes work well as do our fueling stations), a 300 micron barrel filter, a lockable storage closet for your chemicals, a pump for moving used cooking oils.
DOES THE BIOPRO COME WITH ANY ACCESSORIES?
Each BioPro comes with an accessory box which includes PPE (goggles, an apron, protective gloves), a scale, containers for weighing chemicals, hoses, manual, measuring cups, leveling feet, an automatic shut off fueling nozzle, and the yellow Springboard Biodiesel hat.
WHAT IS THE RECOMMENDED OPERATION TEMPERATURE?
The BIoPro should be operated with an ambient temperature of 50° to 100° F (10° to 38° C).
HOW MUCH LABOR IS REQUIRED TO RUN ONE BATCH?
30 minutes to 1 hour.
WHEN I GET THE MACHINE, WHAT WILL I HAVE TO DO TO MAKE MY FIRST BATCH?
Remove the equipment from its crate. Read the manual, plug the machine in, load it, press start.
WHAT SPARE PARTS ARE REQUIRED?
None, though it is highly recommended that you have a methanol pump handy to load methanol into the machine at the start of the process. Many different methanol pumps are available. See our store for one that we recommend. Another helpful tool to have is an oil pump. see store for one suggestion.
WHAT KIND OF MAINTENANCE SHOULD A CUSTOMER PRACTICE TO MAINTAIN THE MACHINE?
Once every 5 to 10 batches, we recommend that the customer flush out the methoxide pumping system with a quart of vinegar and a half gallon of hot water. This will remove any undissolved catalyst that might have built up in the pump or at the bottom of the methoxide tank. Periodically check and clean the water out strainer on the back under warm water. Keep the BioPro indoors.
WHEN OPERATING THE BIOPRO, IS VENTILATION REQUIRED?
Ventilation is recommended but is not a requirement.
ARE THERE ANY LIMITATIONS ON THE QUALITY OF THE USED COOKING OILS THAT CAN BE CONVERTED?
If an operator wants to use the automation, feedstock should not be higher than 5% FFA (free fatty acids). Higher FFA oils can be converted by it will require that the operator do additional manual steps at the outset to prep the oil, before it can be handled using the automated program
WHAT IS THE QUALITY OF THE FINISHED PRODUCT?
If an operator follows the manual, they will make ASTM-D6751 grade biodiesel fuel consistently and reliably. The very similar EN14214 (the European) Standard is also achieved.
CAN BIODIESEL BE MIXED WITH REGULAR DIESEL OR RENEWABLE DIESEL?
All three mix beautifully and at any ratio.
WILL BIODIESEL RUN IN MY DIESEL ENGINE?
Yes.
WHAT ABOUT THESE NEW MODEL ENGINES. I HEARD B5 IS AS HIGH AS YOU CAN GO?
Fact Sheets [biodiesel.org]
WHAT DO THE OEMS RECOMMEND?
OEM Information [Clean Fuels Alliance America]
ARE THERE ANY WASTE STREAMS?
Yes, glycerin and wash water.
WHAT DO I DO WITH THE WASTE STREAMS?
A page from our website that deals with glycerin management.
Wash water can either be put down the drain (check with your local municipality to make sure it meets with their requirements), gray watered or avoided altogether with the implementation of our SpringPro T76 干洗系统。
使用食用油容易吗？大多数餐厅不是已经在出售油脂了吗？
这取决于你的社区，以及你想去敲门的程度。在承诺生产生物柴油之前，最好先调查二手石油的来源。我们发现，仍然有大量的当地廉价餐厅用油，而且餐馆通常更关心的是找到有保障的可靠提货服务，而不是为废油开出最高价格。如果你拥有一家餐厅，那么你完全有能力自己制作生物柴油。
可以自己做石油而不是从餐馆找吗？
越来越多的客户正在种植种子作物，压榨收成，出售剩余的膳食作为牛饲料，并使用这种油生产生物柴油。在使用我们的生物柴油处理器并计算出成本的农场中，他们自己生产燃料的平均价格约为每加仑1.50至2.50美元。与柴油的价格相比，他们仍然可以节省很多钱。看看使用我们的产品可以节省多少钱 投资回报率计算器。
看看我们的客户对我们的看法 商用生物柴油处理器，阅读我们的客户感言。要了解更多信息，请访问我们的 生物柴油图书馆。
.svg)
